In this post I'll go over the setup of my 250 sized mini quad that I use for all my aerial video.
Components:
RCX 1804 - 2400kv
EMAX Simon Series 12A ESC
Rhino 1050mAh 3s 30c & Nanotech 1300mAh 3c 45-90c
HobbyKing cheap 250 Frame ($9.99 I think)
Naze32 Flight Controller
5030, 5040, or 5030x3 blade props
Fatshark 250mW video transmitter
Mobius B camera
D4R-II Frsky receiver
Motors - RCX 1804
I'm very surprised with the power of these little motors. However I've found that they aren't very durable. After a few crashes, the bearings have a lot of slop. Also, several magnets have had to be re-glued in place. If you don't mind occasional motor service then I'd absolutely recommend these. I stress that these are NOT maintenance free motors.
ESCs - EMAX Simon Series 12A
Not much to say about these, they've performed great from the start.
Battery - Rhino 30c and Nanotech 45-90c
If you're looking to keep things cheap, the Rhino or Zippy 30 or 35c batteries will get you flying. However, if you are looking for a real high performer, you'll have to pay nearly double for some quality Nanotechs.
Fame - Modified HK 250
When I wasn't satisfied with the carrying capacity of the stock frame, I designed and printed a vibration isolated camera tray that holds the battery, Mobius, and FPV transmitter. All parts of the frame have taken many hard crashes very well.
Flight Controller - Naze32
I'm not going to go on and on about the Naze32 controller here. All I'll say is that it flies great and is everything I needed for an acrobatic yet stable quad.
Props - 5030 2 and 3 Blade, 5040
I started with 2 blade 5030s then moved on to the other props. 5030s worked fine, but if you're looking for speed or have a heavier setup you'll need the others.
FPV Gear - 250mW and Mobius
So far I haven't ran into any issues with FPV through the Mobius, but that's not to say that it's problem free in all setups.
If anyone has any other questions feel free to ask below.
